Gummed Paper Tape (Water Activated Tape) Machines

Gummed Paper Tape Machines (For Water Activated Tapes)

EPS80 Manual Tape Dispenser (No Power Supply Required)

Tegrabond® EPS80 Economy manual gummed paper water activated tape dispenser is exactly the same concept as standard tape dispensers. Simply load the tape into the machine and pull the tape through the dispenser, using the serrated blade to cut the tape from the full roll. Pull and tear dispenser only suitable for 80mm wide tape

• Use for low level usage, as this is an entry level tool for getting started
• Low cost bench mounted for non-reinforced water activated tape
• Fabric covered roller moistens as the tape is pulled over the wet wheel that is moistened using an integral water reservoir
• Sturdy design with a powder coated metal frame that is built to last
• Is suitable for both gummed side in and gummed site out paper rolls
• The machine weighs 1.7kg
• Tape not included.

BP222 Manual Tape Dispenser(No Power Supply Required)

The Xtegra® Tegrabond® BP222 is a lightweight and compact manual water activated tape dispenser, that has been designed for businesses with low volume packing requirements. Due to its compact design it can fit in workplaces with limited space and is best suited to small businesses that are home or retail run. It uses no batteries or power so is supplied cordless, offering maximum compatibility with many workplaces. The machine is an environmentally friendly way to seal your items, free of plastic and powder, and is extremely simple to operate.

• Designed for businesses with low volume packing requirements
• Soft touch tape delivery
• Easy push tape dispensing
• Blade delivers clean, even cutting of reinforced kraft water activated tape
• Better pack water brushed provide consistent, uniform tape wetting
• Portable dispenser does not require electricity
• Refillable and spill resistant
• Tank holds up to one cup (227ml) of water to activate 114 metres of tape
• Push lever dispensers tape to the desired length
• Simple to operate
• Tape not included

BP333 Manual Tape Dispenser(No Power Supply Required)

The Xtegra® Tegrabond® BP333 is the worlds number one selling machine for manually water activating tape in the industry. It has a strong and rugged design that is both reliable and simple to use. It has 15 pre-set lengths for dispensing tapes for all different box and carton sizes. It requires no power from the mains or from batteries so needs no cords and can be easily accommodated in small spaces without the concern of getting power to the machine. A fantastic environmentally friendly dispenser that saves on energy and speeds yup your packing process. and without the need for batteries or cords, it can be easily fitted into any working environment and is a great energy saving addition to speed up your packing operation.

• Portable dispenser does not require electricity; no power supply required
• 15 pre-set tape lengths measured on a clearly marked dial, maximum 76cm tape length per stroke
• Designed for business that pack around 75 items per day.
• Maximum tape diameter of 190mm
• Durable construction with steel sides for added protection, the machine is built to last
• Fitted with 2 water brushes for constant and uniformed glue activation
• Dual guillotine blades for even and accurate cutting
• Refillable and spill resistant tank holds up to one cup (227ml) of water to activate 114 metres of tape
• Simple to operate
• Tape not included

BP500 Electronic Tape Dispenser

The Xtegra® Tegrabond® BP500is an electric water-activated tape dispenser that has been designed for business that send out medium to high volumes of items. Themachine is calibrated in inches and has a voltage of 115V.

• Designed for business that pack over 100 items per day; medium to high volume users
• Maximum tape diameter of 190mm
• Dual guillotine blades for uniformed cutting
• Fitted with 3 water brushes for constant and uniformed sealing
• Reinforced and non-reinforced water-activated tape, gummed side in or gummed side out
• Functions in working environments that are cold, dusty or with high humidity
• Custom lengths available up to 300cm (120 inches)
• Efficient output of tape 120cm (48 inches) per second
• Durable construction with steel sides covered in durable ABS plastic for added protection
• The machine is built to last with an average of 15 years on average of reliable operation
• A simple to operateportable dispenser that requires an electricity supply
• Tape not included

BP555 Electronic Tape Dispenser

The Xtegra® Tegrabond® BP500is an electric water-activated tape dispenser that has been designed for business that send out high volumes of items. Themachine is calibrated in inches and has a voltage of 115V. It’s been specifically designed to use the least amount of tape possible; one piece seals a box. This offers excellent security and added cost savings.

• Designed for a high volume business that pack over 150 items per day
• Fully programmable designed to dispense tape to any length.
• Maximum tape diameter of 70mmfor use with reinforced and non-reinforced water-activated tape, gummed side in or gummed side out
• 14 pre-set tape length keys provide one-touch dispensing from 6 to 45 inches
• An additional feature is to press and hold the “Random” key for custom lengths of 120 inches
• Self-oiling guillotine blades for uniformed cutting and consistent performance
• An adjustable top heater warms the water making the tape super sticky
• Fitted with 3 water brushes for constant and uniformed sealing
• Functions in working environments that are cold, dusty or with high humidity
• Custom lengths available up to 300cm (120 inches)
• Efficient output of tape 120cm (48 inches) per second
• Durable construction with steel sides covered in durable ABS plastic for added protection
• The machine is built to last with an average of 15 years on average of reliable operation
• A simple to operateportable dispenser that requires an electricity supply
• Tape not included

Still not sure?

Our experts are always on hand to help you navigate our packaging products. You can get in touch by calling the customer helpline on 0345 474 6372, Request a Call Back or by using the Contact Us form.